Cisco WS-C6506 Software Manual page 1191

Chapter 50 Using Switch TopN Reports
To remove the stored reports, perform this task in privileged mode:
Task
Remove the reports.
Use the all keyword to remove all the completed reports. The command clear top all command does not
Note
clear the pending reports; only the reports that have completed are cleared.
This example shows how to remove a specific report and how to remove all stored reports:
Console> (enable) clear top 4
Console> (enable) 06/16/1998,17:36:45:MGMT-5:TopN report 4 killed by Console//.
Console> (enable) clear top all
06/16/1998,17:36:52:MGMT-5:TopN report 1 killed by Console//.
06/16/1998,17:36:52:MGMT-5:TopN report 2 killed by Console//.
Console> (enable) 06/16/1998,17:36:52:MGMT-5:TopN report 3 killed by Console//.
06/16/1998,17:36:52:MGMT-5:TopN report 5 killed by Console//.
Console> (enable)
OL-8978-04
Command
clear top {all | report_num}
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
Running and Viewing Switch TopN Reports
50-5