Cisco WS-C6506 Software Manual page 511

Chapter 15 Configuring Access Control
Configure one PBF gateway called GATEWAY-TEST.
Step 3
Console> (enable) set pbf gw GATEWAY-TEST 10.0.0.100 255.255.255.0 11-11-22-22-3 3-3 3 1
Commit operation successful.
Console> (enable) show pbf gw
Name
Map
VLAN
Gateways
Adjacency
----------------------------------------------------------------
.g0001GATEWAY-TEST 10.0.0.100
Build the PBF map between the client (CLIENT-TEST) and the gateway (GATEWAY-TEST).
Step 4
Console> (enable) set pbf-map CLIENT-TEST GATEWAY-TEST
.cCLIENT-TEST editbuffer modified. Use 'commit' command to apply changes.
.cCLIENT-TEST editbuffer modified. Use 'commit' command to apply changes.
.gGATEWAY-TEST editbuffer modified. Use 'commit' command to apply changes.
.cCLIENT-TEST editbuffer modified. Use 'commit' command to apply changes.
.gGATEWAY-TEST editbuffer modified. Use 'commit' command to apply changes.
Console> (enable) ACL commit in progress.
ACL commit in progress.
Console> (enable) Console> (enable) Mapping in progress.
Please configure VLAN 10.
ACL .cCLIENT-TEST successfully mapped to VLAN 10.
Console> (enable) Mapping in progress.
Please configure VLAN 3.
ACL .gGATEWAY-TEST successfully mapped to VLAN 3.
Console> (enable) show pbf client
Name
Map
VLAN
Clients
Adjacency
-------------------------------------------------
.c0000CLIENT-TEST
Console> (enable) show pbf gw
Name
Map
VLAN
Gateways
Adjacency
----------------------------------------------------------------
.g0001GATEWAY-TEST 10.0.0.100
Console> (enable) show pbf map
Adjacency
------------------
.c0000CLIENT-TEST
.g0001GATEWAY-TEST
OL-8978-04
: GATEWAY-TEST
: No map
: 3
: 1
ip mask
255.255.255.0 11-11-22-22-33-03
: CLIENT-TEST
: GATEWAY-TEST,
: 10
: 1
ip mac
10.0.0.10 00-00-11-11-22-22
: GATEWAY-TEST
: CLIENT-TEST,
: 3
: 1
ip mask
255.255.255.0 11-11-22-22-33-03
ACL
--------------------
.gGATEWAY-TEST
.cCLIENT-TEST
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
Configuring Policy-Based Forwarding
mac
mac
15-115