Enabling Or Disabling Web-Based Proxy Authentication Globally; Enabling Or Disabling Web-Based Proxy Authentication On A Port - Cisco WS-C6506 Software Manual

Configuring Web-Based Proxy Authentication
•
•
•

Enabling or Disabling Web-Based Proxy Authentication Globally

You must enable web-based proxy authentication for the entire system before you can configure it for
the individual ports. After you enable web-based proxy authentication globally, you can configure the
individual ports for web-based proxy authentication. To enable web-based proxy authentication for the
individual ports, see the
page
To enable or disable web-based authentication globally, perform these tasks in privileged mode:
Task
Globally enable web-based proxy
authentication.
Globally disable web-based proxy
authentication.
This example shows how to enable web-based proxy authentication globally:
Console> (enable) set web-auth enable
enabled web-auth
Console> (enable)
This example shows how to disable web-based proxy authentication globally:
Console> (enable) set web-auth disable
disabled web-auth
Console> (enable)

Enabling or Disabling Web-Based Proxy Authentication on a Port

You can enable web-based proxy authentication for individual ports after you enable web-based proxy
authentication globally. To enable web-based proxy authentication globally, see the
Disabling Web-Based Proxy Authentication Globally" section on page
Note If you have disabled web-based proxy authentication globally, web-based proxy authentication on a port
may not start but will be stored in the configuration.
To enable or disable web-based authentication on a port, perform these tasks in privileged mode:
Task
Enable web-based proxy authentication on a
port.
Disable web-based proxy authentication on a
port.
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
42-10
Specifying the Quiet Period, page 42-12
Specifying the Maximum Login Attempts, page 42-13
Displaying Web-Based Proxy Authentication Information, page 42-13
"Enabling or Disabling Web-Based Proxy Authentication on a Port" section on
42-10.
Chapter 42 Configuring Web-Based Proxy Authentication
Command
set web-auth enable
set web-auth disable
42-10.
Command
set port web-auth mod/port enable
set port web-auth mod/port disable
"Enabling or
OL-8978-04