Cisco WS-C6506 Software Manual page 1385

Chapter 55 Configuring a VoIP Network
The IP phone is Dynamic Host Configuration Protocol (DHCP) capable. Optionally, you can program
the IP phone with a static IP address.
The IP phone can be powered by the following sources:
• External power source—Optional transformer and power cord for connecting to a standard wall
receptacle.
Ethernet switching modules with the voice daughter card installed—Provides the inline power to the
•
IP phone.
WS-PWR-PNL (inline-power patch panel)—Provides the inline power to the IP phone. The inline
•
patch panel allows the IP phone to connect to existing Catalyst 4500 series, 5000 family, and
6500 series 10/100BASE-TX switching modules.
• WS-PWR-PNL (inline-power patch panel)—Provides the inline power to the IP phone. The inline
patch panel allows the IP phone to connect to existing Catalyst 4500 series, 5000 family, and
6500 series 10/100BASE-TX switching modules.
WS-X6148-RJ-45 10/100 switching module with either the WS-F6K-VPWR inline-power
•
field-upgrade module or the WS-F6K-FE48-AF inline-power field-upgrade module—Provides the
inline power to the IP phone.
WS-X6148-RJ-21 10/100 switching module with either the WS-F6K-VPWR inline-power
•
field-upgrade module or the WS-F6K-FE48-AF inline-power field-upgrade module—Provides the
inline power to the IP phone.
• WS-X6148X2-RJ-45 10/100 switching module with the WS-F6K-FE96-AF inline-power
field-upgrade module—Provides the inline power to the IP phone.
WS-X6148X2-RJ-21 10/100 switching module with the WS-F6K-FE96-AF inline-power
•
field-upgrade module—Provides the inline power to the IP phone.
WS-6548-GE-TX Gigabit Ethernet switching module with either the WS-F6K-VPWR-GE
•
inline-power field-upgrade module or the WS-F6K-GE48-AF inline-power field-upgrade
module—Provides the inline power to the IP phone.
• WS-6148-GE-TX Gigabit Ethernet switching module with either the WS-F6K-VPWR-GE
inline-power field-upgrade module or the WS-F6K-GE48-AF inline-power field-upgrade
module—Provides the inline power to the IP phone.
Figure 55-2
OL-8978-04
shows how to connect the Cisco IP Phone 7960 and PCs to the Catalyst 6500 series switch.
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
Understanding How a VoIP Network Works
55-3