Clearing The Config_File Environment Variable Settings; Displaying The Switch Boot Configuration - Cisco WS-C6506 Software Manual

Displaying the Switch Boot Configuration

To set the CONFIG_FILE environment variable, perform this task in privileged mode:
Task
Set the CONFIG_FILE environment variable.
This example shows how to set the CONFIG_FILE environment variable:
Console> (enable) set boot auto-config bootflash:generic.cfg;bootflash:6509_1_noc.cfg
CONFIG_FILE variable = bootflash:generic.cfg;bootflash:6509_1_noc.cfg
WARNING: nvram configuration may be lost during next bootup,
Console> (enable)

Clearing the CONFIG_FILE Environment Variable Settings

To clear the entries from the CONFIG_FILE environment variable, perform this task in privileged mode:
Task
Clear the entries in the CONFIG_FILE
environment variable.
This example shows how to clear the entries in the CONFIG_FILE environment variable:
Console> (enable) clear boot auto-config
CONFIG_FILE variable =
Console> (enable)
Displaying the Switch Boot Configuration
To display the current configuration register, the BOOT environment variable, and the CONFIG_FILE
environment variable settings, perform this task:
Task
Display the current configuration register, the
BOOT environment variable, and the
CONFIG_FILE environment variable settings.
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
25-12
and re-configured using the file(s) specified.
Chapter 25 Modifying the Switch Boot Configuration
Command
set boot auto-config
device:filename[;device:filename...]
Command
clear boot auto-config
Command
show boot [mod]
OL-8978-04