Cisco WS-C6506 Software Manual page 983

Chapter 39 Configuring the Switch Access Using AAA
Disabling TACACS+ Authorization
To disable TACACS+ authorization on the switch, perform this task in privileged mode:
Task
Step 1 Disable authorization for normal mode. Enter the
console or telnet keyword if you want to disable
authorization only for the console port or Telnet
connection attempts. Enter the both keyword to
disable authorization for both console port and
Telnet connection attempts.
Step 2 Disable authorization for enable mode. Enter the
console or telnet keyword if you want to disable
authorization only for the console port or Telnet
connection attempts. Enter the both keyword to
disable authorization for both console port and
Telnet connection attempts.
Step 3 Disable authorization of configuration
commands. Enter the console or telnet keyword if
you want to disable authorization only for the
console port or Telnet connection attempts. Enter
the both keyword to disable authorization for
both console port and Telnet connection attempts.
Step 4 Verify the TACACS+ authorization configuration. show authorization
This example shows how to disable TACACS+ EXEC mode authorization for both console and Telnet
connections and verify the configuration:
Console> (enable) set authorization exec disable both
Successfully disabled enable authorization.
Console> (enable)
This example shows how to disable TACACS+ enable mode authorization for both console and Telnet
connections and verify the configuration:
Console> (enable) set authorization enable disable both
Successfully disabled enable authorization.
Console> (enable)
This example shows how to disable TACACS+ command authorization for both console and Telnet
connections and verify the configuration:
Console> (enable) set authorization commands disable both
Successfully disabled commands authorization.
Console> (enable)
OL-8978-04
Command
set authorization exec disable [console | telnet |
both]
set authorization enable disable [console |
telnet | both]
set authorization commands disable [console |
telnet | both]
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
Configuring Authorization on the Switch
39-49