Clearing A Show Command From System Information Logging; Clearing The Configuration Of System Information Logging - Cisco WS-C6506 Software Manual

Catalyst 6500 series switch
Hide thumbs Also See for WS-C6506:
Table of Contents

Advertisement

Chapter 22
Administering the Switch
This example shows how to specify the filename and the server and verify the configuration:
Console> (enable) set system info-log rcp hcavende 10.5.2.10 sysinfo
Successfully set the system information logging file to rcp:sysinfo
Console> (enable) show system info-log
System Logging
--------------
Enabled
Index
-----
Console> (enable)

Clearing a show Command from System Information Logging

To clear all the show commands or a specific show command from system information logging and
verify its removal, perform this task in privileged mode:
Task
Step 1
Clear a show command from system information
logging.
Step 2
Verify the removal of the show command.
This example shows how to clear the show command number 1 from the system information logging
index:
Console> (enable) clear system info-log command 2
Successfully cleared the configured command.
Console> (enable) show system info-log
System Logging
--------------
Enabled
Index
-----
Console> (enable)

Clearing the Configuration of System Information Logging

To clear the configuration of system information logging and restore the default settings, perform this
task in privileged mode:
Task
Step 1
Clear the configuration of system information
logging.
Step 2
Verify that the configuration is cleared.
OL-8978-04
Host
---------------
10.5.2.10
System Command
----------------------------------------------------------
1
show config
2
show version
3
show module
4
show environment
Host
---------------
10.5.2.10
System Command
----------------------------------------------------------
1
show config
2
show module
3
show environment
File
-----------------------------------
rcp:sysinfo
Command
clear system info-log command {all | index}
show system info-log
File
-----------------------------------
rcp:sysinfo
Command
clear config sysinfo-log
show system info-log
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
Logging System Information to a TFTP or rcp Server
Interval
--------
4320
Interval
--------
4320
22-23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 6506Catalyst 6509Catalyst 6513

Table of Contents