Cisco WS-C6506 Software Manual page 840

Chapter 28 Working with Configuration Files
Working with Profile Files
^
!
!
#
# vtp mode off, enable password and dummy domain (edit as needed)
set vtp domain locked_down
set vtp mode off
set vtp passwd locked_down
!
# default VLAN is "Quarantine" (edit as needed)
set vlan 999 name Quarantine
!
# Management VLAN is "Management" (edit as needed)
set vlan 1000 name Management
# Alternate management vlan is "OtherMgmt" (edit as needed)
set vlan 1001 name OtherMgmt
!
# sc0 and sc1 off (edit as needed)
set interface sc0 down
set interface sc0 1000
set interface sc1 down
set interface sc1 1001
!
# default port status is disabled
set port disable ALL_PORTS
!
# default cdp status is disabled
set cdp disable ALL_PORTS
!
# default STP status is with BPDU guard enabled
set spantree portfast bpdu-guard ALL_PORTS enable
!
# default PAgP/LACP status is disabled
set port channel ALL_PORTS mode off
!
# Default DTP status is disabled, no allowed vlans and dot1q-all-tagged mode on.
# Warning: A max of 128 trunks can have non-default configuration in CatOS 8.4
# Warning: Edit port list as needed.
set trunk ALL_PORTS off none
set dot1q-all-tagged enable
!
# default is CPU rate limiters enabled
set rate-limit l2pdu enable
!
# default SSH version is 2
set ssh mode v2
!
# default VLAN is "Quarantine" (edit as needed)
set vlan 999 ALL_PORTS
!
# Enable image checksum verification by default
set image-verification enable
!
# Set a more aggressive default logout timeout
set logout 10
#
#
# Anti-spoofing ACL
#
!
! Deny any packets from the RFC 1918, IANA reserved, ranges,
! multicast as a source, and loopback netblocks to block
! attacks from commonly spoofed IP addresses.
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
28-18
OL-8978-04