Cisco WS-C6506 Software Manual page 1371

Chapter 54 Configuring ASLB
To commit your ASLB configuration settings, perform this task in privileged mode:
Task
Commit your ASLB configuration
settings.
This example shows how to commit the ASLB configuration settings:
Console> (enable) commit lda
Commit operation in progress...
Successfully committed Local Director Accelerator.
Console> (enable)
Displaying the ASLB Configuration
Entering the show lda command without a keyword (committed | uncommitted) displays the
Note
committed configuration settings.
To display the committed or uncommitted ASLB configuration settings, perform this task in privileged
mode:
Task
Display the committed or uncommitted
ASLB configuration settings.
This example shows how to display the committed ASLB configuration settings:
Console> (enable) show lda committed
Status:Committed
Virtual IP addresses:
Local Director Flow:10.0.0.8/ (TCP port 8)
Router MAC:
00-23-45-67-ee-7f
LD MAC:00-11-22-33-55-66
LD Router Side:
---------------
Router and LD are on VLAN 110
LD is connected to switch port 4/26 on VLAN 110
LD Server Side:
---------------
Server(s) and LD are on VLAN 105
LD is connected to switch port 4/40 on VLAN 105
Console> (enable)
OL-8978-04
Command
commit lda
Command
show lda [committed | uncommitted]
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
Configuring ASLB on the Switch
54-15