Cisco WS-C6506 Software Manual page 1097

Chapter 44 Configuring Network Admission Control
This example shows how to specify the number of times that a packet is retransmitted to the CTA before
declaring the CTA as nonresponsive, and specify the RADIUS server retransmit time:
Console> (enable) set eou max-retry 6
eou max-retry set to 6.
Console> (enable)
Revalidating a Host
To revalidate a host, perform this task in privileged mode:
Task
Revalidate a host.
This example shows how to revalidate all clientless hosts:
Console> (enable) set eou revalidate authentication clientless
Revalidate all clientless hosts
Console> (enable)
Enabling or Disabling EOU Logging for LAN Port IP Events
To enable or disable EOU logging for LAN port IP events, perform this task in privileged mode (the
default is disable):
Task
Enable or disable EOU logging for LAN port IP
events.
This example shows how to enable EOU logging for LAN port IP events:
Console> (enable) set eou logging enable
EoU Logging enabled
Console> (enable)
OL-8978-04
Configuring Network Admission Control with LAN Port IP
Command
set eou revalidate all
set eou revalidate authentication {clientless |
eap | static}
set eou revalidate ip ip-address
set eou revalidate mac mac-address
set eou revalidate posture-token posture-token
Command
set eou logging {enable | disable}
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
44-13