Cisco WS-C6506 Software Manual page 1043

Chapter 40 Configuring 802.1X Authentication
supp-timeout
tx-period
Console> (enable)
To display the 802.1X authenticated MAC addresses, perform this task in normal mode:
Task
Display the 802.1X authenticated MAC
addresses.
This example shows how to display the 802.1X authenticated MAC addresses. In this example, both
802.1X and port security are enabled:
Console> (enable) show cam static 8/17
* = Static Entry. + = Permanent Entry. # = System Entry. R = Router Entry.
X = Port Security Entry $ = Dot1x Security Entry
VLAN
----
12
17
Total Matching CAM Entries Displayed
Console> (enable)
OL-8978-04
30 seconds
30 seconds
Dest MAC/Route Des [CoS]
------------------ -----
00-40-ca-13-ae-bf $
00-30-94-c2-c3-c1 X
Command
show cam static
Destination Ports or VCs / [Protocol Type]
-------------------------------------------
8/17
8/17
=2
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
Configuring 802.1X Authentication on the Switch
40-49