Cisco WS-C6506 Software Manual page 806

Downloading the System Software Images Using rcp
Single Module Image rcp Download Example
For a procedure on downloading the software images to the intelligent modules, see the
Note
the Switching Module Images Using rcp" section on page
This example shows a complete rcp download procedure of an ATM software image to a single ATM
module:
Console> (enable) show version 4
Mod Port Model
--- ---- ---------- --------- ----------------------------------------
4
Console> (enable) copy rcp 4/flash
IP address or name of remote host []? 172.20.52.3
Name of file to copy from []? cat6000-atm.3-2-7.bin
Download image rcp:cat6000-atm.3-2-7.bin to Module 4 FLASH (y/n) [n]? y
This command will reset Download Module(s) you selected.
Do you wish to continue download flash (y/n) [n]? y
Download done for module 4, please wait for it to come online
File has been copied successfully.
Console> (enable) 09/2/1999,13:13:54:SYS-5:Module 4 is online
Console> (enable) show version 4
Mod Port Model
--- ---- ---------- --------- ----------------------------------------
4
Console> (enable)
Multiple Module Image rcp Download Example
For a procedure on downloading the software images to the intelligent modules, see the
Note
the Switching Module Images Using rcp" section on page
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
27-20
Serial #
1 WS-X6101 003414855 Hw : 1.2
Serial #
1 WS-X6101 003414855 Hw : 1.2
27-17.
Versions
Fw : 1.3
Sw : 3.2(6)
Versions
Fw : 1.3
Sw : 3.2(7)
27-17.
Chapter 27 Working with System Software Images
"Downloading
"Downloading
OL-8978-04