Configuring Mac Authentication Bypass; Enabling Or Disabling Mac Authentication Bypass Globally; Enabling Or Disabling Mac Authentication Bypass On A Port - Cisco WS-C6506 Software Manual

Configuring MAC Authentication Bypass

Configuring MAC Authentication Bypass
These sections describe how to configure MAC authentication bypass:
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Enabling or Disabling MAC Authentication Bypass Globally

The default is disabled. To enable or disable MAC authentication bypass globally, perform this task in
privileged mode:
Task
Enable or disable MAC authentication bypass globally.
This example shows how to enable MAC authentication bypass globally:
Console> (enable) set mac-auth-bypass enable
Mac-Auth-Bypass enabled globally.
Console> (enable)

Enabling or Disabling MAC Authentication Bypass on a Port

When you enable or disable MAC authentication bypass on a port, you automatically enable or disable
PortFast on the same port. The default is enabled.
To enable or disable MAC authentication bypass on a port, perform this task in privileged mode:
Task
Enable or disable MAC authentication bypass on a port.
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
41-6
Enabling or Disabling MAC Authentication Bypass Globally, page 41-6
Enabling or Disabling MAC Authentication Bypass on a Port, page 41-6
Initializing the MAC Authentication Bypass State for a Port, page 41-7
Reauthenticating the MAC Address for a Port, page 41-7
Specifying the Shutdown Timeout Period, page 41-7
Specifying the AuthFail Timeout Period, page 41-8
Specifying the Reauthentication Timeout Period, page 41-8
Enabling or Disabling Reauthentication, page 41-9
Specifying the Security Violation Mode, page 41-9
Enabling or Disabling MAC Authentication Bypass RADIUS Accounting, page 41-9
Configuring a PVLAN on a MAC Authentication Bypass-Enabled Port, page 41-10
Configuring MAC Authentication Bypass on a PVLAN Port, page 41-11
Displaying MAC Authentication Bypass Information, page 41-11
Displaying the MAC Authentication Bypass Global Configuration, page 41-12
Chapter 41 Configuring MAC Authentication Bypass
Command
set mac-auth-bypass {disable | enable}
Command
set port mac-auth-bypass mod/port
{disable | enable}
OL-8978-04