Displaying Redundancy-Related Information; Performing An Msfc Switchover; Performing An Msfc Software Reload; Using Redundancy-Related Debug Commands - Cisco WS-C6506 Software Manual

Chapter 24 Configuring NSF with SSO MSFC Redundancy

Displaying Redundancy-Related Information

Use the show redundancy [qualifier] command to display redundancy-related information. The
supported qualifiers are as follows:
Router# show redundancy ?
clients
counters
events
history
linecard-group
states
switchover
|
<cr>
Router#

Performing an MSFC Switchover

Use the redundancy switch-activity [force] command to switch over to the standby MSFC. The force
keyword overrides any restrictions.

Performing an MSFC Software Reload

Use the redundancy reload {peer | shelf} command to reload the standby MSFC (peer keyword) or all
modules in the chassis (shelf keyword).

Using Redundancy-Related Debug Commands

Use the debug redundancy [qualifier] command to display redundancy-related debug information. The
supported qualifiers are as follows:
Router# debug redundancy ?
config-sync
ehsa
errors
fsm
kpa
msg
progression
status
timer
Router#
Use the debug hybrid-ha [qualifier] command to display NSF/SSO-specific redundancy information.
The supported qualifiers are as follows:
Router# debug hybrid-ha ?
all
errors
events
ipc
kpa
Router#
OL-8978-04
Redundancy Facility (RF) client list
Redundancy Facility (RF) operational counters
Redundancy Facility (RF) events list
Redundancy Facility (RF) history
Line card redundancy group information
Redundancy Facility (RF) states
Redundancy Facility (RF) switchover
Output modifiers
HA config sync debug option
Redundancy Facility (RF) EHSA
Redundancy Facility (RF) Errors
Redundancy Facility (RF) FSM events
Redundancy Facility (RF) keep alive
Redundancy Facility (RF) Messaging events
Redundancy Facility (RF) Progression events
Redundancy Facility (RF) Status events
Redundancy Facility (RF) Timer events
All Hybrid HA SSO/NSF platform specific debugging messages
Hybrid HA SSO/NSF platform specific warnings and errors
Hybrid HA SSO/NSF platform specific events
Hybrid HA SSO/NSF platform specific IPC related events
Hybrid HA SSO/NSF platform specific Keep-Alive related events
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
Using the CLI to Configure NSF/SSO
24-13