Displaying Gvrp Statistics; Clearing Gvrp Statistics; Disabling Gvrp On Individual 802.1Q Trunk Ports - Cisco WS-C6506 Software Manual

Configuring GVRP on the Switch

Displaying GVRP Statistics

To display the GVRP statistics on the switch, perform this task:
Task
Display the GVRP statistics.
This example shows how to display the GVRP statistics for port 1/1:
Console> (enable) show gvrp statistics 1/1
Join Empty Received:
Join In Received:
Empty Received:
LeaveIn Received:
Leave Empty Received:
Leave All Received:
Join Empty Transmitted:
Join In Transmitted:
Empty Transmitted:
Leave In Transmitted:
Leave Empty Transmitted: 0
Leave All Transmitted:
VTP Message Received:
Console> (enable)

Clearing GVRP Statistics

To clear all the GVRP statistics on the switch, perform this task in privileged mode:
Task
Clear the GVRP statistics.
This example shows how to clear all the GVRP statistics on the switch:
Console> (enable) clear gvrp statistics all
GVRP Statistics cleared for all ports.
Console> (enable)

Disabling GVRP on Individual 802.1Q Trunk Ports

To disable GVRP on the individual 802.1Q trunk ports, perform this task in privileged mode:
Task
Step 1 Disable GVRP on an individual 802.1Q trunk
port.
Step 2 Verify the configuration.
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
17-8
Command
show gvrp statistics [mod/port]
0
0
0
0
0
40
156
0
0
0
41
0
Command
clear gvrp statistics {mod/port | all}
Command
set port gvrp disable mod/port
show gvrp configuration
Chapter 17 Configuring GVRP
OL-8978-04