Cisco WS-C6506 Software Manual page 1113

Chapter 44 Configuring Network Admission Control
Port
----- --------------- ---- --------- -----------------
5/1
Port
----- --------------- --------------- ---------------- -------------------
5/1
Port
----- --------------- -------------
5/1
Displaying the EOU Settings on a Port
To display the EOU settings on a port, perform this task in enable mode:
Task
Display the EOU settings on a port.
This example shows how to display the EOU settings on a port:
Console> (enable) show port eou 5/1
Port
-------- --------- --------------- ----------------- ---------------
5/1
Port
-------- ------------- ----------- ---------- ---------------
5/1
Port
-------- ------------ --------------------
5/1
Port
-------- ------------------ --------------------------------
5/1
Port
-------- ------------------------------------------------------
5/1
Port
----- --------
5/1
Clearing Policy Mapping on a Port
To clear the policy mapping on a port, perform this task in enable mode:
Task
Clear the EOU policy mapping on a port.
This example shows how to clear the EOU policy mapping on a port:
Console> (enable) clear port eou 5/1 aaa-fail-policy
OL-8978-04
IP-Address Vlan Enabled
- 1 enabled
IP-Address Session-Timeout Session-Timeleft Radius-Rcvd-Timeout
- -
IP-Address Policy-Groups
- -
EOU-State IP Address
disabled -
FSM State Auth Type
- -
Posture URL Redirect
- -
Termination action Session id
-
PolicyGroups
-
Critical
enabled
Configuring Network Admission Control with LAN Port IP
Web-Auth-State
-
-
Command
show port eou mod/port
MAC Address
-
SQ-Timeout Session Timeout
- -
-
Command
clear port eou mod/port aaa-fail-policy
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
Critical-Status
---------------
-
No
Critical-Status
-
44-29