Configuring Gmrp On The Switch; Gmrp Software Requirements; Default Gmrp Configuration - Cisco WS-C6506 Software Manual

Configuring GMRP on the Switch

Configuring GMRP on the Switch
These sections describe how to configure the GARP Multicast Registration Protocol (GMRP):
•
•
•
•
•
•
•
•
•
•
•
•
For an overview of GMRP operation, see the
Note

GMRP Software Requirements

GMRP requires supervisor engine software release 5.2 or later releases.

Default GMRP Configuration

Table 51-3
Table 51-3
Feature
GMRP enable state
GMRP per-port enable state
GMRP forward all
GMRP registration
GARP/GMRP timers
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
51-20
GMRP Software Requirements, page 51-20
Default GMRP Configuration, page 51-20
Enabling GMRP Globally, page 51-21
Enabling GMRP on Individual Switch Ports, page 51-21
Disabling GMRP on Individual Switch Ports, page 51-22
Enabling the GMRP Forward-All Option on a Switch Port, page 51-22
Disabling the GMRP Forward-All Option on a Switch Port, page 51-23
Configuring GMRP Registration, page 51-23
Setting the GARP Timers, page 51-25
Displaying GMRP Statistics, page 51-26
Clearing GMRP Statistics, page 51-26
Disabling GMRP Globally on the Switch, page 51-27
shows the default GMRP configuration.
GMRP Default Configuration
Chapter 51
"Understanding How GMRP Works" section on page
Default Value
Disabled
Disabled
Disabled on all ports
Normal on all ports
Join time: 200 ms
•
Leave time: 600 ms
•
• Leaveall time: 10,000 ms
Configuring Multicast Services
51-6.
OL-8978-04