Cisco WS-C6506 Software Manual page 1094

Catalyst 6500 series switch
Hide thumbs Also See for WS-C6506:
Table of Contents

Advertisement

Configuring Network Admission Control with LAN Port IP
Enabling or Disabling LAN Port IP Globally
To globally enable or disable LAN port IP on the switch, perform this task in privileged mode (the
default is disabled):
Task
Globally enable or disable LAN port IP on the
switch.
This example shows how to globally enable LAN port IP on the switch:
Console> (enable) set eou enable
EoU globally enabled.
Console> (enable)
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
44-10
Statically Authorizing a MAC Address as an Exception Host Device and Applying a Policy to the
Device, page 44-11
Restarting a Host's State Machine, page 44-12
Specifying the CTA Packet Retransmit Time and RADIUS Server Retransmit Time, page 44-12
Revalidating a Host, page 44-13
Enabling or Disabling EOU Logging for LAN Port IP Events, page 44-13
Setting EAPOUDP-Related Timers, page 44-14
Setting EOU Rate Limiting, page 44-14
Enabling or Disabling EOU RADIUS Accounting, page 44-15
Bypassing, Disabling, or Enabling LAN Port IP on a Per-Port Basis, page 44-15
Initializing LAN Port IP on a Per-Port Basis, page 44-15
Revalidating LAN Port IP on a Per-Port Basis, page 44-16
Redirecting LAN Port IP Control Packets to the Supervisor Engine, page 44-16
Displaying the Global EOU Configuration, page 44-16
Displaying a Summary of the LAN Port IP State on All LAN Port IP-Enabled Ports, page 44-17
Displaying a Summary of the LAN Port IP State on a Per-Port Basis, page 44-17
Displaying Host-Specific Information, page 44-18
Displaying EOU Authentication-Related Information, page 44-18
Displaying the EOU Log, page 44-19
Displaying the EOU Results on a Posture-Token Basis, page 44-19
Clearing the LAN Port IP Configuration, page 44-19
Clearing All the Host EOU Sessions, page 44-20
Clearing the LAN Port IP Session for a Particular Host, page 44-20
Clearing an IP Address from an Exception Group or Clearing an Exception Group, page 44-20
Clearing EAPOUDP-Related Timers to Their Default Values, page 44-21
Clearing the CTA Packet Retransmit Time, page 44-21
Chapter 44
Configuring Network Admission Control
Command
set eou {enable | disable}
OL-8978-04

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 6506Catalyst 6509Catalyst 6513

Table of Contents