Chapter 21
Configuring GOLD
Displaying Online Diagnostic Tests and Test Results
You can display the online diagnostic tests that are configured for specific modules and check the results
of the tests using the show commands.
To display online diagnostic test information, perform these tasks in normal mode:
Task
Display the bootup diagnostic level.
Display the test content for the specified
module(s) or all modules.
Display the configuration settings for the online
diagnostic failure response for the supervisor
engine.
Display the diagnostic event log.
Display the online diagnostic on-demand
configuration settings.
Display the diagnostic test results for the
specified module(s) or all modules.
Display the online diagnostic scheduling.
Display the current online diagnostic status for all
modules.
Clearing the Online Diagnostic Configuration
To clear online diagnostic configuration parameters, perform these tasks in normal mode:
Task
Clear the bootup online diagnostic level.
Clear the online diagnostic event-log size.
Clear the online diagnostic health-monitoring
configuration.
OL-8978-04
Command
show diagnostic bootup level
show diagnostic content module [mod_num | all]
show diagnostic diagfail-action
show diagnostic events [event-type {error | info
| warning}]
show diagnostic events [module {mod_list | all}]
show diagnostic events
show diagnostic ondemand settings
show diagnostic result module mod_list | all
[detail | test] [test_list] [detail]
show diagnostic schedule module mod_list
show diagnostic status
Command
clear diagnostic bootup level
clear diagnostic event-log size
clear diagnostic monitor interval module
mod_list test [test_list | all]
clear diagnostic monitor module mod test
test_list
clear diagnostic monitor syslog
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
Configuring Online Diagnostics
21-11