Cisco WS-C6506 Software Manual page 666

Configuring Online Diagnostics
Task
Disable syslog generation that occurs when a test
fails.
Clear online diagnostic scheduling information.
This example shows how to clear the bootup online diagnostic level:
Console> (enable) clear diagnostic bootup level
Diagnostic level set to bypass
Console> (enable)
This example shows how to clear the online diagnostic event-log size:
Console> (enable) clear diagnostic event-log size
Diagnostic event-log size set to default(500)
Console> (enable)
These examples show how to clear the online diagnostic monitoring configuration:
Console> (enable) clear diagnostic monitor interval module 7 test 3
Clear diagnostic monitor interval for module 7 test 3
Console> (enable)
Console> (enable) clear diagnostic monitor module 7 test 1
Module 7 test 1 diagnostic monitor disable.
Console> (enable)
Console> (enable) clear diagnostic monitor syslog
Diagnostic monitor syslog disable.
Console> (enable)
Clear the online diagnostic scheduling configuration for tests 1 and 2 on module 7:
Console> (enable) clear diagnostic schedule module 7 test 1-2 daily 12:12
Clear diagnostic schedule at daily 12:12 for module 7 test 1-2
Console> (enable)
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
21-12
Chapter 21
Command
clear diagnostic monitor syslog
clear diagnostic schedule module mod_num test
{test-id | test-id-range | all} {[port {port_num |
port_range | all}] | [device {device_num |
device_range | all}]}
Configuring GOLD
OL-8978-04