Cisco WS-C6506 Software Manual page 1096

Configuring Network Admission Control with LAN Port IP
To statically authorize a device using the device MAC address and apply an associated policy to the
device, perform this task in privileged mode:
Task
Statically authorize a device using the device
MAC address and apply an associated policy to
the device.
This example shows how to statically authorize a device using the device MAC address and apply an
associated policy to the device:
Console> (enable) set eou authorize mac-address 03-56-B7-45-65-56 policy poll
Mapped MAC 03-56-b7-45-65-56 to policy name poll.
Console> (enable)
Restarting a Host's State Machine
To restart a host's state machine, perform this task in privileged mode:
Task
Restart a host's state machine.
This example shows how to restart a host's state machine using the IP address:
Console> (enable) set eou initialize ip 172.20.52.19
Initializing Eou for ipAddress 172.20.52.19
Console> (enable)
Specifying the CTA Packet Retransmit Time and RADIUS Server Retransmit Time
To specify the number of times that a packet is retransmitted to the CTA before declaring the CTA as
nonresponsive, and to specify the RADIUS server retransmit time, perform this task in privileged mode
(the default is 3 and the range is 1 through 10):
Task
Specify the number of times that a packet is
retransmitted to the CTA before declaring the
CTA as nonresponsive, and specify the RADIUS
server retransmit time.
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
44-12
Chapter 44 Configuring Network Admission Control
Command
set eou authorize mac-address mac_address
policy policy_name
set eou authorize mac-address mac_address
mac_mask policy policy_name
Command
set eou initialize all
set eou initialize authentication {clientless | eap
| static}
set eou initialize ip ip-address
set eou initialize mac mac-address
set eou initialize posture-token posture-token
Command
set eou max-retry max-retry
OL-8978-04