Cisco WS-C6506 Software Manual page 1117

Chapter 44 Configuring Network Admission Control
Task
Specify the policy name and URL redirect
string.
This example shows how to specify the policy name and URL redirect string:
Console> (enable) set policy name exception_policy url-redirect http://cisco.com
Url Redirect http://cisco.com mapped to policy name exception_policy
Console> (enable)
Displaying the Policy Name and URL Redirect String Mapping
To display the policy name and URL redirect string mapping, perform this task in normal mode:
Task
Display the policy name and URL redirect
string mapping.
This example shows how to display the policy name and URL redirect string mapping for the specified
policy:
Console> (enable) show policy name exception_policy
Policy Name : exception_policy
----------------------------------------------
URL-Redirect : http://cisco.com
Console> (enable)
This example shows how to display the policy names and URL redirect string mappings for all policies:
Console> (enable) show policy name all
Policy Name : TEST
----------------------------------------------
Associated IP Address/Mask Information:
0.0.0.18/255.255.255.224
Policy Name : poll
----------------------------------------------
Associated IP Address/Mask Information:
0.0.0.19/255.255.255.224
Policy Name : BLDG_F
----------------------------------------------
Policy Name : exception_policy
----------------------------------------------
URL-Redirect : http://cisco.com
Console> (enable)
Clearing the URL Redirect String Associated with the Policy Name
To clear the URL redirect string associated with the policy name, perform this task in privileged mode:
Task
Clear the URL redirect string associated with
the policy name.
OL-8978-04
Configuring Network Admission Control with LAN Port IP
Command
set policy name policy-name url-redirect
url-redirect-string
Command
show policy name [all | policy-name]
Command
clear policy name policy-name url-redirect
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
44-33