Disabling The Gmrp Forward-All Option On A Switch Port; Configuring Gmrp Registration - Cisco WS-C6506 Software Manual

Chapter 51 Configuring Multicast Services
This example shows how to enable the GMRP forward-all option on port 1/1:
Console> (enable) set gmrp fwdall enable 1/1
GMRP Forward All groups option enabled on port 1/1.
Console> (enable)

Disabling the GMRP Forward-All Option on a Switch Port

To disable the GMRP forward-all option on a switch port, perform this task in privileged mode:
Task
Disable the GMRP forward-all option on a switch
port.
This example shows how to disable the GMRP forward-all option on port 1/1:
Console> (enable) set gmrp fwdall disable 1/1
GMRP Forward All groups option disabled on port 1/1.
Console> (enable)

Configuring GMRP Registration

These sections describe how to configure the GMRP registration modes on the switch ports:
•
•
•
Setting Normal Registration
Configuring a switch port in normal registration mode allows dynamic GMRP multicast registration and
deregistration on the port. Normal mode is the default on all switch ports.
To set the normal registration on a switch port, perform this task in privileged mode:
Task
Step 1
Set the normal registration on a switch port.
Step 2
Verify the configuration.
This example shows how to set normal registration on port 2/10:
Console> (enable) set gmrp registration normal 2/10
GMRP Registration is set normal on port 2/10.
Console> (enable)
OL-8978-04
Setting Normal Registration, page 51-23
Setting Fixed Registration, page 51-24
Setting Forbidden Registration, page 51-24
Command
set gmrp fwdall disable mod/port
Command
set gmrp registration normal mod/port
show gmrp configuration
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
Configuring GMRP on the Switch
51-23