Chapter 18
Configuring MVRP
Task
Step 1
Disable MVRP on an individual trunk port.
Step 2
Verify the configuration.
This example shows how to disable MVRP on a port 3/14:
Console> (enable) set port mvrp 3/14 disable
MVRP is disabled on port(s) 3/14.
Console> (enable)
Disabling MVRP Globally
To disable MVRP globally on the switch, perform this task in privileged mode:
Task
Disable MVRP on the switch.
This example shows how to disable MVRP globally on the switch:
Console> (enable) set mvrp disable
MVRP is disabled on the switch.
Console> (enable)
Clearing MVRP Configuration
To clear all MVRP configuration on the switch, perform this task in privileged mode
:
Task
Clear MVRP configuration.
This example shows how to clear all MVRP configuration on the switch:
Console> (enable) clear mvrp configuration all
Warning:MVRP configuration will be cleared.
Do you want to continue (y/n) [y]? y
MVRP configuration is cleared for all ports on the switch.
Console> (enable)
Clearing MVRP Counters
To clear all MVRP counters on the switch, perform this task in privileged mode:
Task
Clear all MVRP counters.
OL-8978-04
Command
set port mvrp mod/port disable
show mvrp configuration
Command
set mvrp disable
Command
clear mvrp configuration {all | mod/port}
Command
clear mvrp counters
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
Configuring MVRP on the Switch
18-11