Cisco WS-C6506 Software Manual page 1122

Configuring Network Admission Control with LAN Port 802.1X
To enable or disable the session timeout override for LAN port 802.1X, perform this task in privileged
mode:
Task
Enable or disable the session timeout override
for LAN port 802.1X.
This example shows how to enable the session timeout override for LAN port 802.1X:
Console> (enable) set port dot1x 5/8 re-authperiod server enable
Port 5/8 session-timeout-override option is enabled
Console> (enable)
This example shows how to display the session timeout override setting for LAN port 802.1X:
Console> (enable) show port dot1x 5/8
Port
----- ------------------- ---------- ------------------- -------------
5/8
Port
----- ------------- -----------------
5/8
Port
----- ------------- --------------- ------------------ ---------------
5/8
Port
----- ------------------------ ----------------------------------
5/8
Port
----- --------
5/8
Console> (enable)
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
44-38
Auth-State BEnd-State Port-Control
- -
Port-Mode Re-authentication
SingleAuth disabled
Posture-Token Critical-Status Termination action Session-timeout
- -
Session-Timeout-Override Url-Redirect
enabled
Critical
disabled
Chapter 44
Command
set port dot1x mod/port re-authperiod server
{disable | enable}
force-authorized
Shutdown-timeout
----------------
disabled
-
-
Configuring Network Admission Control
Port-Status
-
Control-Mode
admin oper
---------------
Both -
-
OL-8978-04