Snmp Terminology - Cisco WS-C6506 Software Manual

Configuring SNMP
This chapter describes how to configure the Simple Network Management Protocol (SNMP) on the
Catalyst 6500 series switches.
This chapter consists of these sections:
•
•
•
•
•
•
•
•
For complete syntax and usage information for the commands that are used in this chapter, refer to the
Note
Catalyst 6500 Series Switch Command Reference publication.

SNMP Terminology

Table 47-1
OL-8978-04
SNMP Terminology, page 47-1
Understanding How SNMP Works, page 47-4
Understanding How SNMPv1 and SNMPv2c Work, page 47-5
Understanding How SNMPv3 Works, page 47-7
Enabling and Disabling SNMP Processing, page 47-10
Configuring SNMPv1 and SNMPv2c on the Switch, page 47-11
SNMPv1 and SNMPv2c Enhancements in Software Release 7.5(1), page 47-12
Configuring SNMPv3 on the Switch, page 47-16
lists the terms that are used in the SNMP technology.
C H A P T E R
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
47
47-1