Cisco WS-C6506 Software Manual page 652

Digital Optical Monitoring
This example shows how to display port transceiver information:
Console> show port transceiver 2/1
sh port transceiver 5/1
Transceiver monitoring is enabled.
Monitor interval is set to 1 minute
ITU Channel not available (1550 nm)
## : high alarm, #
NA or N/A: not applicable, Tx: transmit, Rx: receive.
mA: milliamperes, dBm: decibels (milliwatts).
Port
-----
5/1
Displaying Port Transceiver Configuration Information
To display port transceiver configuration information, perform this task in enabled mode:
Task
Display port transceiver configuration
information.
This example shows how to display port transceiver configuration information:
Console> show port transceiver 3/1 config
Transceiver monitoring is disabled.
Monitor interval is set to 1 minute.
Port
-----
3/1
Port
-----
3/1
Port
-----
3/1
Port
-----
3/1
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
20-76
: high warning, @
Temperature Voltage
(Celsius) (Volts)
----------- ---------
29.2 N/A
High Alarm High Warn
Threshold
Value Severity Value
------- ----------
default critical
High Alarm
Threshold
Value Severity Value
------- ----------
default critical
High Alarm
Threshold
Value Severity Value
------- ----------
default critical
High Alarm
Threshold
Value Severity Value
------- ----------
default critical default
: low warning, @@ : low alarm.
Optical
Current Tx Power
(mA) (dBm)
------------ ------------
102.5
Command
show port transceiver mod/port config
Transmit Power (dBm)
Low Warn
Threshold Threshold
Severity Value Severity
------- ----------
default critical default
Receiver Power (dBm)
High Warn Low Warn
Threshold Threshold
Severity Value Severity
------- ----------
default critical default
Temperature (Celsius)
High Warn Low Warn
Threshold Threshold
Severity Value Severity
------- ----------
default critical default
Voltage (volts)
High Warn Low Warn
Threshold Threshold
Severity Value Severity
------- ----------
critical default
Chapter 20 Checking Status and Connectivity
Optical
Rx Power
(dBm)
------------
0.9 @@ -31.0
Low Alarm
Threshold
Value Severity
------- ---------- -------
critical default
Low Alarm
Threshold
Value Severity
------- ----------
critical default
Low Alarm
Threshold
Value Severity
------- ---------- -------
critical default
Low Alarm
Threshold
Value Severity
------- ---------- -------
critical default
-----
critical
------- -----
critical
------
critical
-----
critical
OL-8978-04