Configuring 802.1X Authentication On The Switch - Cisco WS-C6506 Software Manual

Chapter 40 Configuring 802.1X Authentication
•
•

Configuring 802.1X Authentication on the Switch

These sections describe how to configure 802.1X authentication on the switch:
Note For information on using a RADIUS server for VLAN assignment, see the
VLAN Assignments Using a RADIUS Server Work" section on page
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
OL-8978-04
The private VLANs and 802.1X configurations are mutually exclusive of one another.
Software release 8.6(1) and later releases provide support for configuring 802.1X with
Note
private VLANs. For more information, see the
Private VLANs" section on page
With a PFC3A/PFC3B/PFC3BXL, you can use the set rate-limit l2port-security command to
enable, disable, or set the 802.1X port security rate limiters globally on the switch. For more
information on configuring rate limiting, see the
Switch" section on page 7-61.
Enabling 802.1X Authentication Globally, page 40-14
Disabling 802.1X Authentication Globally, page 40-14
Enabling 802.1X Authentication for Individual Ports, page 40-15
Enabling 802.1X with Inaccessible Authentication Bypass, page 40-15
Enabling Multiple 802.1X Authentications, page 40-16
Setting and Enabling Automatic Reauthentication of the Host, page 40-17
Manually Reauthenticating the Host, page 40-18
Enabling Multiple Hosts, page 40-18
Disabling Multiple Hosts, page 40-19
Setting the Quiet Period, page 40-19
Setting the Shutdown Timeout Period, page 40-19
Setting the Authenticator-to-Host Retransmission Time for EAP-Request/Identity Frames,
page 40-20
Setting the Back-End Authenticator-to-Host Retransmission Time for the EAP-Request Frames,
page 40-20
Setting the Back-End Authenticator-to-Authentication-Server Retransmission Time for the
Transport Layer Packets, page 40-21
Setting the Back-End Authenticator-to-Host Frame-Retransmission Number, page 40-21
Setting the Critical Recovery Delay for an Authentication Feature, page 40-21
Resetting the 802.1X Configuration Parameters to the Default Values, page 40-22
Enabling 802.1X Authentication for the DHCP Relay Agent, page 40-23
Disabling 802.1X Authentication for the DHCP Relay Agent, page 40-24
Adding Hosts to an 802.1X Guest VLAN, page 40-24
"Configuring 802.1X Authentication with
40-41.
"Configuring Layer 2 PDU Rate Limiting on the
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
Configuring 802.1X Authentication on the Switch
"Understanding How 802.1X
40-7.
40-13