Cisco WS-C6506 Software Manual page 1322

Configuring QoS on the Switch
Enabling Per-Port QoS Statistics Data Export
To enable QoS statistics data export on a per-port basis, perform this task in privileged mode:
Task
Step 1 Enable QoS statistics data export per port.
Step 2
Verify the configuration.
You must enable QoS statistics data export globally in order for the per-port configuration to take effect.
Note
This example shows how to enable the QoS statistics data export per port and verify the configuration:
Console> (enable) set qos statistics export port 5/1 enable
Port export enabled on 5/1.
Console> (enable) show qos statistics export info
Statistics export status and configuration information
------------------------------------------------------
Export status: enabled
Export time interval: 300
Export destination:172.20.52.3 SYSLOG facility LOG_LOCAL6 (176), severity LOG_DE
BUG (7)
Port
------
1/1
1/2
3/1
3/2
5/1
5/2
<output truncated>
Console> (enable)
When enabled on a port, QoS statistics data export contains the following fields, separated by the
delimiter character:
•
•
•
•
•
•
•
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
52-90
Export
--------
disabled
disabled
disabled
disabled
enabled
disabled
Export type ("1" for a port)
Slot/port
Number of ingress packets
Number of ingress bytes
Number of egress packets
Number of egress bytes
Time stamp
Command
set qos statistics export port mod/port enable |
disable
show qos statistics export info
Chapter 52 Configuring QoS
OL-8978-04