Administering And Monitoring Vmps - Cisco WS-C6506 Software Manual

Configuring VMPS and Dynamic Port VLAN Membership on the Switch
This example shows how to specify the VMPS server, verify the VMPS server specification, assign the
dynamic ports, and verify the configuration:
Console> (enable) show vmps server
VMPS domain server VMPS Status
---------------------------------------
192.0.0.6
192.0.0.1
192.0.0.9
Console> (enable) set port membership 3/1-3 dynamic
Ports 3/1-3 vlan assignment set to dynamic.
Spantree port fast start option enabled for ports 3/1-3.
Console> (enable) set port membership 1/2 dynamic
Trunking port 1/2 vlan assignment cannot be set to dynamic.
Console> (enable) set port membership 2/1 dynamic
ATM LANE port 2/1 vlan assignment can not be set to dynamic.
Console> show port
Port
1/1
1/2
2/1
3/1
3/2
3/3
Console> (enable)
The show port command displays dyn- under the Vlan column of the display when it has not yet been
Note
assigned a VLAN for a port.

Administering and Monitoring VMPS

To show information about the MAC address-to-VLAN mappings, perform one of these tasks in
privileged mode:
Task
Show the VLAN to which a MAC address is
mapped in the database.
Show the MAC addresses that are mapped to a
VLAN in the database.
Show the ports belonging to a restricted VLAN.
To show the VMPS statistics, perform this task in privileged mode:
Task
Show the VMPS statistics.
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
19-6
primary
Name Status Vlan
connect dyn-3
connect trunk
connect trunk
connect dyn-5
connect dyn-5
connect dyn-5
Chapter 19 Configuring Dynamic Port VLAN Membership with VMPS
Level Duplex
normal full
normal half
normal full
normal half
normal half
normal half
Command
show vmps mac [mac_address]
show vmps vlan [vlan_name]
show vmps vlanports [vlan_name]
Command
show vmps statistics
Speed Type
100 100 BASE-TX
100 100 BASE-TX
155 OC3 MMF ATM
10 10 BASE-T
10 10 BASE-T
10 10 BASE-T
OL-8978-04