Disabling Gmrp Globally On The Switch; Configuring Multicast Router Ports And Group Entries On The Switch; Specifying Multicast Router Ports - Cisco WS-C6506 Software Manual

Chapter 51 Configuring Multicast Services
This example shows how to clear the GMRP statistics for all VLANs:
Console> (enable) clear gmrp statistics all
Console> (enable)

Disabling GMRP Globally on the Switch

To disable GMRP globally on the switch, perform this task in privileged mode:
Task
Disable GMRP globally on the switch.
This example shows how to disable GMRP globally on the switch:
Console> (enable) set gmrp disable
GMRP disabled.
Console> (enable)
Configuring Multicast Router Ports and Group Entries on the
Switch
These sections describe how to specify the multicast router ports manually and configure the multicast
group entries:
•
•
•
•

Specifying Multicast Router Ports

When you enable IGMP snooping, the switch automatically learns to which ports a multicast router is
connected. However, you can manually specify the multicast router ports.
To specify the multicast router ports manually, perform this task in privileged mode:
Task
Step 1 Manually specify a multicast router port.
Step 2
Verify the configuration.
OL-8978-04
Specifying Multicast Router Ports, page 51-27
Configuring Multicast Groups, page 51-28
Clearing Multicast Router Ports, page 51-29
Clearing Multicast Group Entries, page 51-29

Configuring Multicast Router Ports and Group Entries on the Switch

Command
set gmrp disable
Command
set multicast router mod/port
show multicast router [igmp | rgmp][mod/port]
[vlan_id]
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
51-27