System Programming - Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual

MERLIN LEGEND Communications System Release 6.0

System Programming 555-660-111

2 Programming with SPM
System Programming
When the restore completes, press
! 
YYYY
System Programming
A primary function of SPM is to provide a method for programming the
communications system. The Sys Program option gives you access to all of the
system programming features available from the system programming console.
Basic Programming Information
To begin programming, you must perform one of the following to display the
System Programming menu on the console or PC:
On the console:
On the PC:
In most cases, you can press
changes. Exceptions to this are noted as part of a procedure. When you complete
a procedure and press
hierarchy. Occasionally, when you press
screen. In a few cases, pressing
Programming menu where you can select another option to program or exit from
system programming.
To complete a procedure and save the information you have programmed, press
(
If you are programming a group of sequentially numbered extensions or trunks,
you may have the option of pressing
automatically provides the number of the next extension or trunk in the sequence,
thus saving you a couple of steps. If
with the current option.
Exit
(
).
to return to the SPM Main Menu.
xxxx = number of blocks sent
2
2
Menu
TQN
Type
or 5 to exit from a screen without making any
), you usually move up one screen in the menu
( ), you return to the previous
brings you back to the System
( ). This saves your entry and
displays on the screen, you can use it
Issue 1
February 1998
Page 2-51
Press any key