Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 238

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
3 Common Administrative Procedures
QCC Optional Features
Console Display/Instructions
Enter the number of rings before the directed call returns
! 
to the QCC queue ( nn = 1 to 15).
Dial or type [ nn ].
Save your entry.
! 
Select @‡r… .
Return to the System Programming menu.
! 
Select @‘v‡ two times.
Position Busy Backup
Use this procedure to designate or remove the calling group to provide the backup
position for the QCC queue. The specified calling group receives incoming calls
when all QCC operator positions are in position-busy mode.
Position Busy Backup is programmed for the QCC queue rather than for individual
QCC operator positions. The calling group designated as the QCC queue backup
serves as the backup for the Remote Access feature and as backup when the
QCC is being used as the system programming console.
Only one Position Busy Backup can be programmed per system.
Summary: Position Busy Backup
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure Pƒr…h‡‚…
PC Procedure
Additional Information
System Manager
Hybrid/PBX
Not required
Form 6a, Optional Operator Features
No backup
Calling group number
No
No
RˆrˆrqÃ8hyy
Å Ä  Ã U
Drop Dial ext. number
  Ç Ç
or
3
3
R88Ã7hpxˆƒ
More
@‡r… or 9ryr‡r @‘v‡
I
+ Type ext. number
Issue 1
February 1998
Page 3-60
PC
Ã

ÇÇ
@‘v‡