Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 234

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
3 Common Administrative Procedures
QCC Optional Features
Console Display/Instructions
Specify the QCC operator extension.
! 
Assign or remove the extension as a message center.
! 
Select
Return to the System Programming menu.
! 
Select three times.
Extended (Directed) Call Completion
Use this procedure to specify one of the two basic options shown below for QCC
operator positions with a DSS only:
Automatic Completion. Allows one-touch call transfer; that is, calls are
transferred by touching only an extension button on the DSS. The operator
does not have to press the Release button.
Manual Completion. QCC operators must press the Release button to
direct a call using a DSS.
This option cannot be programmed for individual QCC operator positions. The
setting applies to all QCC operator positions.
Summary: Extended (Directed) Call Completion
Programmable by
Mode
Idle Condition
or
.
System Manager
Hybrid/PBX
Not required
Additional Information
If no DSS is attached:
SP: "Entering an Extension"
If DSS is attached:
Toggle the red LED on or off as required.
On = extension is message center position.
Flashing = extension is not message
center position.
Off = extension is not an operator position.
You may continue to assign or remove
extensions as a message center by repeating
Steps 4 and 5.
3
3
Issue 1
February 1998
Page 3-56
PC
Ã


ÇÇÇ