Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 303

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
3 Common Administrative Procedures
Optional Extension Features
Console Display/Instructions
Go to the third screen of the Extensions menu.
! 
Select Trunk to Trunk Transfer.
! 
Specify the extension.
! 
Assign or remove trunk-to-trunk transfer from the extension entered in Step 4.
! 
Select @‡r… to allow trunk-to-trunk transfer or
9ryr‡r to disallow trunk-to-trunk transfer.
Return to the System Programming menu.
! 
Select @‘v‡ twice.
Additional Information
Press More twice.
If no DSS is attached:
SP: "Entering an Extension"
If DSS is attached:
Toggle the red LED on or
off as required. Go to Step 6.
On = trunk-to-trunk transfer is enabled.
Off = trunk-to-trunk transfer is disabled.
You may continue to assign or remove
trunk-to-trunk transfer from additional extensions
by repeating Steps 4 and 5.
Issue 1
February 1998
Page 3-125
PC

Ã


ÇÇ