Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 144

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
2 Programming with SPM
Using SPM
If the IS II/III PC does not respond to the Pass-Thru request from the control unit
(for example, because the PC is turned off), you see the following message:
If the connection between the control unit and the IS II/III PC fails, the connection
between the control unit and the SPM PC is dropped. You see the following
message:
When you press
Follow the steps below to initiate the Pass-Thru.
At the SPM Main Menu press
! 
The display area changes to 24-lines by 80-characters, which is much larger than the
display area on the console simulation window (7-lines by 24-characters).
Type your login name and press
! 
you return to the SPM Main Menu.
to select
.
February 1998
Page 2-44
.
Issue 1