Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 256

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
3 Common Administrative Procedures
Extensions
Valid Entries
Inspect
Copy Option
Console Procedure To program extension:
PC Procedure
Two System Access Ring buttons and a System Access
Originate Only Ring button are assigned to tip/ring equipment
(for example, single-line telephones or fax machines
connected to an 012 module). No personal line or pool
buttons are assigned.
All Modes. System Access Ring (Hybrid/PBX mode) or
Intercom Ring (Key and Behind Switch modes), System
Access Voice (Hybrid/PBX mode) or Intercom Voice (Key and
Behind Switch modes), and the first 18 through 29 lines
connected to the control unit are assigned to all DLC operator
positions. The number of lines assigned depends on the type
of telephone used as a DLC operator position. Refer to the
appropriate telephone planning form for details.
Not applicable
Yes: specific button options.
Yes (You can copy additional SA buttons to another
extension, but you cannot overwrite SA buttons that are
already assigned.)
8‡…Q…t Q…‚t…h€Ã@‘‡
More
T‡h…‡ Q…‚t…h€Ãr‘‡r†v‚
To copy extension programming:
8‡…Q…t
More Copy ext.
@‡r…
Dial copy to ext. no.
 Æ Ã
To program extension:
Type ext. no.
Program extension
 Æ Ä
To copy extension programming:
Type copy from ext. no.
Type copy to ext no.
Dial ext. no.
@‡r… @‘v‡
Dial copy from ext. no.
@‡r… @‘v‡

 Ç Ç
 Ç Ç
Issue 1
February 1998
Page 3-78
@‡r…
@‘v‡
@‘v‡