Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 555

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Programming Procedures
Uniform Dial Plan Facilities
Single Trunk Procedure
Console/Display Instructions
Specify a single trunk identifier.
! 
Select
Enter the number of the line/trunk.
! 
Enter the switch identifier ( nn = Null, 1–20, 21–40, 41–50, 51–60).
! 
Assign or remove a switch identifier.
! 
Select
(to return to Step 3).
Return to the System Programming menu.
! 
Select three times.
.
or
(to return to Step 2) or
Additional Information
Dial or type [ nnnn ].
xxxx = trunk number entered in Step 2.
Dial or type [ nn ].
You may continue to assign or remove switch
identifiers from additional lines/trunks by
repeating Steps 2 and 3.
Issue 1
February 1998
Page 4-85
PC
Ã
Ã
Ã



ÇÇÇ