Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 117

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
2 Programming with SPM
Accessing SPM
Set up the appropriate physical connections between the PC and the control
! 
unit.
See "Connecting the PC" on page 13.
If you installed SPM on the hard disk of the PC, go to Step 5.
! 
If the PC does not have a hard disk, insert the SPM diskette into Drive A.
! 
Type f)Ã and press
! 
$ !
appears on the screen.
Type spm and press
! 
Press any key to display the SPM Main Menu shown below.
! 
If the SPM Main Menu does not appear or if the information on the screen
is garbled, press any key again.
If the COM Port (communications port) screen appears instead of the SPM
Main Menu, it indicates that the SPM software has not been initialized. See
"Initializing the SPM Software" on page 9.
To select an option, press the function key that corresponds to the option you
! 
want. For example, to select
.
to display the SPM Welcome screen shown below.
;;;
NOTE:
The function keys shown on either side of the display are included
here for quick reference. See
details on using the PC keys in SPM.
/DQJXDJH
X.XX current version of SPM
"SPM Screens" on page 2–21
press .
Issue 1
February 1998
Page 2-17
for