Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 165

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
2 Programming with SPM
Upgrading the System
Table
communications system.
— When you upgrade from Release 1.0 to Release 4.2, you must first
program the features listed in
features listed in
then the features listed in
Table 2–11, then the features listed in
listed in Table 2–13.
2–14. Lists the features added with Release 5.0 of the
— When you upgrade from Release 4.2 to Release 5.0, you must
program the features listed in
— When you upgrade from Release 4.1 to Release 5.0, you must
program the features listed in
Table 2–14.
— When you upgrade from Release 4.0 to Release 5.0, you must
program the features listed in
Table 2–13, then the features listed in
— When you upgrade from Release 3.1 to Release 5.0, you must
program the features listed in
Table 2–12, then the features listed in
listed in Table 2–14.
— When you upgrade from Release 3.0 to Release 5.0, you must
program the features listed in
Table 2–11, then the features listed in
listed in Table 2–13, then the features listed in
— When you upgrade from Release 2.0 or 2.1 to Release 5.0, you
must program the features listed in
listed in Table 2–10, then the features listed in
features listed in
then the features listed in
— When you upgrade from Release 1.1 to Release 5.0, you must
program the features listed in
Table 2–9, then the features listed in
listed in Table 2–11, then the features listed in
features listed in
— When you upgrade from Release 1.0 to Release 5.0, you must first
program the features listed in
features listed in
then the features listed in
Table 2–11, then the features listed in
listed in Table 2–13, then the features listed in
Table 2–7, then you must program the
Table 2–8, then the features listed in
Table 2–10, then the features listed in
Table 2–14.
Table 2–13, then the features listed in
Table 2–12, then the features listed in
Table 2–11, then the features listed in
Table 2–10, then the features listed in
Table
Table 2–12, then the features listed in
Table 2–14.
Table 2–8, then the features listed in
Table
Table 2–13, then the features listed in
Table 2–7, then you must program the
Table 2–8, then the features listed in
Table 2–10, then the features listed in
February 1998
Table
Table 2–12, then the features
Table 2–14.
Table 2–13, then the features
Table 2–12, then the features
Table 2–14.
2–9, then the features
Table 2–11, then the
Table
2–10, then the features
Table 2–12, then the
Table
Table
Table 2–12, then the features
Table 2–14.
Issue 1
Page 2-65
2–9,
2–13,
2–14.
2–9,