System Programming And Maintenance; Issue - Lucent Technologies MERLIN LEGEND Release 6.0 System Programming And Maintenance Manual

MERLIN LEGEND Communications System Release 6.0 MERLIN LEGEND Communications System Release 6.0
System Programming and Maintenance (SPM) 555-660-140
System Programming and Maintenance (SPM)

System Programming and Maintenance

System Programming and
Maintenance
The System Programming and Maintenance (SPM) software package offers an
alternate method of programming the MERLIN LEGEND Communications
System using a PC. This method frees the system programming console for
other uses and also provides the additional functions listed below:
Backing up system programming information
Restoring system programming information from a backup
Converting system programming information from one release to
another (part of the upgrade procedure)
Upgrading the communications system to a newer release
Printing, viewing, and storing reports
Programming the communications system remotely
Programming in surrogate mode
SPM runs on a DOS-based PC as a standalone program or on a UNIX
System platform as part of Intuity, Integrated Solution II, or Integrated
Solution III (IS II/III are discontinued products). It is available on a 3.5-
inch diskette for DOS or UNIX, or on a 5.25 inch diskette for DOS.
NOTE:
SPM software can be used directly from the floppy disks on a
DOS machine; however, if your PC has a hard disk, you should
install SPM onto the hard disk.
This book describes the use of SPM on a PC with a DOS operating system. If
your system has the Intuity or IS II/III application, you have the UNIX System
version of SPM.

Issue 1

Issue 1
February 1998 February 1998
Page 1