Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 423

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
3 Common Administrative Procedures
Night Service
Extensions Procedure
Console/Display Instructions
Specify the extension you want to assign to the Night Service group.
! 
Assign or remove the extension(s) from the Night Service group.
! 
YYY
Return to the System Programming menu.
! 
Select @‘v‡ twice.
Calling Group Procedure.
Console Display/Instructions
Enter the extension of the calling group to be added.
! 
Additional Information
YYYY
xxxx = number entered in Step 4
If no DSS is attached:
SP: "Entering an Extension"
If DSS is attached:
Toggle the red LED on or
off as required. Then, go to Step 3.
On = extension assigned to group
Off = extension not assigned to group
YYYY
xxxx = number entered in Step 4
Select
continue adding or removing extensions
from the Night Service group by
repeating Steps 1 and 2.
Select
begin assigning extensions to the next
Night Service group (operator position).
Additional Information
YYYY
xxxx = number entered in Step 4
Dial or type [ nnnn ].
to assign or
to remove your entry and
to save your entry and
Issue 1
February 1998
Page 3-245
PC
Ã
ÇÇ
PC
Ã