Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 728

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Common Administrative Procedures
Extensions
Analog Multiline Telephone without Built-in
Speakerphone (BIS) or Hands Free Answer on
Intercom (HFAI) Capability
Use this procedure to identify analog multiline telephones with flat membrane
buttons that do not have built-in speakerphones (BIS) or Hands Free Answer on
Intercom (HFAI) capability. The models that must be identified are 5-button,
10-button, 34-button, and 34-button deluxe analog multiline models with flat
membrane buttons.
Keep the factory setting for analog multiline models with raised plastic buttons,
including the following models: 10-button HFAI, 34-button with speakerphone
(SP-34), 34-button with speakerphone and display (SP-34D), BIS-10, BIS-22,
BIS-34, BIS-22D, and BIS-34D.
This procedure is not necessary for MLX or single-line telephones.
Summary: Analog Multiline Telephones without
BIS or HFAI Capability
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System Manager
All
Not required
Form 4b, Analog Multiline Telephone
Form 5a, Direct-Line Console (DLC): Analog
Data Form 1a, Modem Data Workstations
All models of analog multiline telephones (except the
analog multiline display console) have BIS/HFAI capability.
Extension numbers
Yes
No
È 
Type ext. no.
4
4
Dial ext. no.
 Ç Ç
Issue 1
February 1998
Page 4-258