Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 464

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
3 Common Administrative Procedures
Memory Card
Console/Display Instructions
Observe the backup completion screen.
! 
7hpxˆƒÃ
OOOOOOOOOOO
7hpxˆƒÃTˆppr††sˆyy’
8‚€ƒyr‡rq
@‘v‡
Return to the System Programming menu.
! 
Select @‘v‡ three times.
Automatic Backup
To preserve the most recent copy of your customized system data, you can
program the system to automatically backup programming information onto the
translation memory card. Automatic backups may be set for daily or weekly
operation. If automatic backup is activated, the time may be set for daily backup
(factory setting is 2:00 am) or the time and day may be set for weekly backup
(factory setting is 2:00 am Sunday).
The system places the automatic backup into one of two designated files:
6VUP768F and 6VUP768F! . If both files are empty, the system places the backup
in 6VUP768F  If both files already contain backups, the system selects the older
of the two files and overwrites it. The system performs this file "toggle" each time it
performs an automatic backup.
While the backup is in progress, you cannot access system programming
functions, your Personal Directory, or alarm clock functions (any programmed
alarms are temporarily deactivated).
If any type of programming is taking place at an extension during the automatic
backup procedure, the backup is canceled. The system does not re-attempt the
backup.
If an automatic backup fails for any reason (including a system-busy condition), all
of the programmed alarm buttons on system operator consoles light and the
information is recorded in both the permanent error log and the last 10 error logs.
The system does not re-attempt the backup.
Also see "Backup Messages" on page –290
occur during the automatic backup procedure.
Additional Information
)
nnnnnnnnnnn = backup filename
3
for information about errors that may
Issue 1
February 1998
Page 3-286
PC
ÇÇÇ