Loudspeaker Paging - Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Common Administrative Procedures
Extensions
Console Display/Instructions
Assign or remove the line/trunk assignment.
! 
@‡r…
Select
Return to the System Programming menu.
! 
Select .

Loudspeaker Paging

Use this procedure to identify the line/trunk jack reserved for connection of
loudspeaker paging equipment.
If you use equipment that rebroadcasts music or other copyrighted materials, you
may be required to obtain a copyright license from and pay license fees to a third
party (such as ASCAP or BMI). Magic on Hold requires no such license and can
be purchased from your Lucent Technologies dealer.
A maximum of three single-zone or multizone loudspeaker paging systems can be
connected to the system.
You cannot assign the line/trunk identified for loudspeaker paging equipment use
to a line/trunk pool. If the line/trunk is currently assigned to a pool, you must
remove it before you program this option.
You cannot assign the line/trunk identified for loudspeaker paging equipment use
as a Remote Access line/trunk, and you cannot use its jack for Music on Hold or
maintenance alarm.
Summary: Loudspeaker Paging
Programmable by
Mode.
Idle Condition.
Planning Form.
Factory Setting.
Valid Entries.
Inspect.
Copy Option.
Console Procedure.
PC Procedure.
or
.
System Manager
All, but in Hybrid/PBX mode the line/trunk designated for
loudspeaker paging cannot be assigned to a line/trunk pool.
Line/trunk idle
Form 2c, System Numbering: Line/Trunk Jacks
Not Applicable
Line/trunk numbers
Yes
No
 Ä
Additional Information
4
4
Dial line/trunk no.
Type line/trunk no.
February 1998
Page 4-262
 Ç
Issue 1
PC

Ç