Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 630

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Programming Procedures
DID Trunks
Console Display/Instructions
Erase the current number of added digits ( nnn ).
! 
Y
OOO
Enter the number of digits to add ( n = 1 to 9999).
! 
Dial or type [ n ].
Continue to specify added digits for the other trunk block or go to Step 9.
! 
Select .
Save your entry.
! 
Select .
Return to the System Programming menu.
! 
Select twice.
Signaling
Use this procedure to specify whether the type of dialing signal from the local
telephone company is touch-tone or rotary. Touch-tone dial mode cannot be
programmed for immediate-start DID trunks.
Touch-tone single-line telephone users cannot make calls by using individual
trunks programmed for rotary operation. The touch-tone signals generated from
the telephone while dialing are transmitted to the central office at the same time
the rotary signals are sent to the system. The central office receives both signals
and cannot process the call.
Additional Information
x = block entered in Step 4
Press Drop.
Return to Step 6. The next block is
displayed on Line 1.
4
Issue 1
February 1998
Page 4-160
PC
7G
I
Ã


ÇÇ