Programming Guides; Restoring From The Translation Memory Card; Restoring From The System Programming Disk - Lucent Technologies MERLIN LEGEND Release 5.0 Installation Manual

MERLIN LEGEND Communications System Release 5.0
Installation 555-650-140
Initializing and Testing the System
Initializing the System

Programming Guides

The following guides are available to assist you:
Programming Summary for quick-reference procedures (document
number 555-630-111)
System Programming for detailed procedures (document number
555-630-140, in the binder accompanying this one)
System Programming and Maintenance (SPM) for detailed SPM
procedures (document number 555-630-140, in the binder
accompanying this one)

Restoring from the Translation Memory Card

If you received the Release 5.0 Translation memory card, follow the steps
below to initialize the system:
Perform a System Erase (frigid start).

See Maintenance and Troubleshooting for detailed instructions.
Console Procedure:Menu
00 Enter
twice
Use the programming console and the translation memory card to

perform the Restore procedure.
See Appendix D of Maintenance and Troubleshooting for instructions.
Restoring from the System
Programming Disk
If you received the Release 5.0 system programming disk, follow the steps
below to initialize the system:
Perform a System Erase (frigid start).

See Maintenance and Troubleshooting for detailed instructions.
Console Procedure:Menu
00 Enter
twice
Demand Test
Yes
Demand Test
Yes
Maintenance Slot
(Line 5, left button)
System Erase
Maintenance Slot
(Line 5, left button)
System Erase
Issue 1
June 1997
Page 7-2
Dial or Type
Dial or Type