Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 546

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Programming Procedures
Lines and Trunks
Console/Display Instructions
Assign or remove the line/trunk from the pool.
! 
(QWHU
Select
Return to the System Programming menu.
! 
Select twice.
Block Procedure
Console Display/Instructions
Specify the block of 20 lines associated with the 20 line buttons
! 
on the system programming console.
Select
Assign the appropriate lines/trunks to the pool.
! 
Return to the System Programming menu.
! 
Select twice.
or
.
Additional Information
You may continue to assign or remove additional
lines/trunks from the pool by repeating Steps 2
and 3.
Additional Information
Toggle the red LED on or off as required.
On = trunk is assigned to specified pool
Off = trunk is not assigned to specified pool
Issue 1
February 1998
Page 4-76
PC

ÇÇ
PC
à Ä
Å Æ
ÇÇ