Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 483

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Programming Procedures
Basic System Operating Conditions
Summary: Set System Date
Programmable by. System Manager
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Set System Time
The System Time feature allows you to set the time that appears on MLX display
telephones and on SMDR reports. See
detailed information.
NOTE: NOTE: NOTE:
In Release 6.0 and later systems, where a MERLIN LEGEND
Communications System switch is networked in a private network with one
or more other MERLIN LEGEND Communications System switches or with
one or more DEFINITY Communications Systems, SMDR reports may
report outgoing calls using more than one call record (for example, for
tandem calls), depending upon how SMDR is programmed and how calls
are routed. If SMDR is reporting outgoing calls and users are employing
private network lines to make these calls, ensure that the system date and
time are set accurately on each system that carries these calls. As you
examine call reports, you may need to be aware of time zone differences
among networked system locations.
Summary: Set System Time
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
All
Not required
Form 1, System Planning
01-01-00
Month: 01 to 12
Day: 01 to 31
Year: 00 to 99
No
No
Ã É U
Drop
+
2I
"Set System Time" on page 3–9
System Manager
All
Not Required
Form 1, System Planning
0000
4
 Ç
Dial current date
Type current date
4
4
Issue 1
February 1998
Page 4-13
for