Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 301

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
3 Common Administrative Procedures
Optional Extension Features
Console/Display Instructions
Erase the current number of delay rings (x).
! 
@‘‡r†v‚ÃYYYY
Y
Enter the number of delay rings.
! 
YYYY
Y
Save your entry.
! 
Select
Return to the System Programming menu.
! 
Select twice.
Trunk-to-Trunk Transfer
Use this procedure to enable or disable trunk-to-trunk transfer at an extension.
When trunk-to-trunk transfer is disabled, users cannot transfer an outside call to
an outside line.
NOTE: NOTE: NOTE:
In Release 6.0 and later systems (Hybrid/PBX mode only), calls can be
transferred to members in the non-local dial plan tables, even if trunk-to-
trunk transfer is not allowed. This allows users of single-line telephones to
transfer incoming calls from the PSTN to non-local dial plan extensions.
or
Additional Information
xxxx = extension entered in Step 4
Press Drop or
Backspace.
Dial or type the number of delay rings:
You may use backspace to delete
the last digit entered.
If you select to assign a forwarding delay to
the next extension in a sequence, repeat
Steps 6 and 7.
3
Issue 1
February 1998
Page 3-123
PC
UG

Æ
Ã
 
ÇÇ